about us
Huiquan Traffic Facilities
Established in 2006, Shandong Guanxian Huiquan Traffic Facilities Co., Ltd. is located in Guanxian New Century Industrial Zone, Shandong Province. The enterprise registered capital of One hundred and twenty million CNY, covers an area about 43,290 square meters. We are one of the comprehensive entity enterprises that specializing in production, sales of hot dip galvanized guardrail.
PRODUCTS
-
Accessories
The bolts are defined in ANSI B1.13M for Grade 6 g tolerances. Bolt material is conformed to ASTM...
-
U shape post
The post is mainly to follow the AASHTO M180, GB-T 31439.1-2015 and EN1317 standard. The material...
-
C shape post
The post is mainly to follow the AASHTO M180, GB-T 31439.1-2015 and EN1317 standard. The material...
-
W beam guardrail
The guardrail is mainly to follow the AASHTO M180, GB-T 31439.1-2015 and EN1317 standard. The mat...
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
INQUIRYPRODUCTS
-
H shape post
The material for that are mainly the Q235B (S235Jr the yield strength is more than 235Mpa) and Q345B (S355Jr the yield strength is more than the 345Mpa).
huiquan
-
Thrie beam guardrail2
The guardrail is mainly to follow the AASHTO M180, GB-T 31439.1-2015 and EN1317 standard. The material for that are mainly the Q235B (S235Jr the yield strength is more than 235Mpa) and Q345B (S355Jr the yield strength is more than the 345Mpa). For the thickness of the guardrail mainly through the 2.67mm to 4.0mm. The surface treatment is hot dipped galvanized, to follow the AASHTO M232 and the equal standard such as AASHTO M111, EN1461 etc. The guardrail designed for divide the road into different part, and lower the damage while the accident accrued.
-
H shape post
The surface treatment is hot dipped galvanized, to follow the AASHTO M232 and the equal standard such as AASHTO M111, EN1461 etc. The post is installed into the grounds, to fasten and support the guardrail. It can lower the impact force while the accident accrued.
-
Terminal end
The terminal end is mainly to follow the AASHTO M180, GB-T 31439.1-2015 and EN1317 standard. The material for that are mainly the Q235B (S235Jr the yield strength is more than 235Mpa) and Q345B (S355Jr the yield strength is more than the 345Mpa).
-
Accessories
The bolts are defined in ANSI B1.13M for Grade 6 g tolerances. Bolt material is conformed to ASTM F568M for Class 4.6. Material for corrosion resistant bolts is conformed to ASTM F 568M for Class 8.83. bolts. The surface treatment shall follow the AASHTO M232.
